Oscillatory Motion definition, examples, applications and properties

The motion of planets around the Sun is considered as a periodic motion as it is repeated regularly in equal periods of time, The motion of spring is considered as an oscillatory periodic motion, where it is a periodic motion because it is regularly repeated in equal periods of time and an oscillatory motion because it is repeated on the two sides of its rest position.

Types of motion

There are two types of motion, which are: Transitional motion and periodic motion. Periodic motion is a motion, which is regularly repeated in equal periods of time, Examples of periodic motion: Oscillatory motion and Wave motion.

Concept of oscillatory motion

Make a simple pendulum (A metallic piece, which is tied to one end of a thread, while the other end is tied to a pencil). Hold the pencil with your left hand, and pull the metallic piece (the oscillating body) to the right side, then leave it. Record the time taken by the metallic piece to repeat its movement several times.

The oscillating body moves on both sides around its rest position, This motion is repeated in equal time intervals, The displacements of the oscillating body around its rest position are equal.

The velocity of the oscillating body reaches its maximum value when it passes its rest position and decreases gradually when it goes far from it until it reaches zero at the maximum displacement on both sides of the rest position, the oscillating body moves around its rest position, where the motion is repeated through equal intervals of time which is known as “Oscillatory motion“.

Oscillatory motion is the periodic motion of the oscillating body around its real point, where the motion is repeated through equal intervals of time.

The relation between the velocity of an oscillating body and its kinetic energy (The kinetic energy = ½ (mass × squared velocity) = ½ mv².

The kinetic energy of an oscillating body is directly proportional to the mass of the oscillating body and the squared velocity of the oscillating body. So, the kinetic energy increases when the velocity of the oscillating body increases and vice versa (assuming that its mass is not changed).

The velocity of the body is taken as a measure of its kinetic energy because kinetic energy = ½ mv². The kinetic energy of a pendulum is maximum when the pendulum passes its rest position because the velocity of a pendulum is maximum when the pendulum passes its rest position and the kinetic energy is directly proportional to the square of velocity.

Application of oscillatory motion

The motion of the spring is regularly repeated in equal periods of time at the two sides of its rest position. The velocity of the oscillatory body (spring) is very high when it passes its rest position. The velocity of the oscillating body (spring) decreases when it goes far from its rest position until it reaches zero at the maximum displacement.

Examples of oscillatory motion:

• Tuning fork, Pendulum, Spring, Motion of swing, and Stretched string (Example: Guitar).
• The movement of Earth’s crust during earthquakes and the movement of atoms in molecules.

The motion of the rotary bee is considered as a periodic motion only because it is repeated regularly at equal time intervals, but it is not an oscillatory motion, because it is not repeated on the two sides of its rest position.

Graphical representation of the oscillatory motion

The oscillatory motion of the spring can be represented graphically, The simple harmonic motion is considered the simplest form of oscillatory motion. In the simple harmonic motion: the velocity of the oscillating body is inversely proportional to its displacement away from its rest position (A). i.e. the velocity of the oscillating body increases as it approaches the rest position (point A) and vice versa.

Properties of oscillatory motion

1. Amplitude
2. Complete oscillation
3. Periodic time
4. Frequency

Amplitude

The amplitude is the maximum displacement achieved by the oscillating body away from its rest position, The measuring unit of the amplitude is metre (m).

When the amplitude of an oscillating body is 20 cm, this means that the maximum displacement of the oscillating body away from its rest position is 20 cm

When the maximum displacement of the oscillating body is 4 cm, this means that the amplitude of the oscillating body is 4 cm (0.04m).

Complete oscillation

Complete oscillation is the motion of the oscillating body when it passes by a fixed point on its path two successive times in the same direction.

Amplitude= ¼ Complete oscillation

Distance of one complete oscillation= 4 amplitude

Periodic time

The periodic time is the time taken by the oscillating body to make one complete oscillation, the measuring unit is second (sec.). If the periodic time of an oscillating body is 0.2 sec, this means that the time taken by this oscillating body to make one complete oscillation is 0.2 sec.

Periodic time = Time in seconds/ Number of complete oscillations.

When the time taken by a spring to make 60 complete oscillations is 1 minute. this means that the periodic time of this spring is [(1× 60)/60] which equals 1 sec.

The periodic time of an oscillating body decreases as the number of complete oscillations increases at the same time because the periodic time is inversely proportional to the number of complete oscillations made by the oscillating body at a constant time.

Frequency

Frequency is the number of complete oscillations produced by an oscillation body in one second. The measuring unit is Oscillation/sec. or Hertz (Hz) Related to the German scientist Hertz. When the frequency of an oscillation body 20 Hertz, this means that the number of complete oscillations produced by the oscillation body in one sec. is 20 complete oscillations.

Frequency= Number of complete oscillations/ Time in seconds

When the number of complete oscillations made by an oscillating body in 1 minute is 60 complete oscillations. This means that the frequency of the oscillating body is [60/ (1× 60)] which equals 1 Hz.

The value of the periodic time will be equal to that of frequency when the number of complete oscillations made by the oscillating body equals the time taken by a second.

The scientist Higenz designed the pendulum watch, considering that the pendulum oscillates at a constant frequency, whatever the amplitude changes.

Kilohertz= 1× 10³ Hertz  –   Megahertz= 1× 10⁶  Hertz   –  Gigahertz= 1× 10⁹  Hertz.

Periodic time (T) = 1/Frequency (F)

Frequency (F) = 1/Periodic time (T)

Frequency (F) × Periodic time (T) = 1

The frequency of an oscillating body is the reciprocal of the periodic time. Frequency is inversely proportional to the periodic time. the frequency decreases by increasing the periodic time and vice versa).

The frequency of the vibrating body decreases by increasing the periodic time because the frequency is inversely proportional to the periodic time.

Periodic time = Time of complete oscillation. so, Periodic time= 4 × time of amplitude.

Time of amplitude = ¼ periodic time.

Properties of Mechanical waves and Electromagnetic waves

Properties of electromagnetic waves and Light reflection

Mechanical waves and some technological applications of sound mechanical waves

Role of waves in transferring energy, Wave Motion, Transverse waves & Longitudinal waves